E21/LED4N060S3-ATEX1

ATEX certified E2 luminaires have been developed for safe use in gas and dusty environments where high temperatures and sparks could cause an explosion hazard. Our ATEX luminaires bear the following markings: EX II 2D Ex tb IIIC T80 Db and EX II 3G Ex ec IIC T4 Gc. Just like the E2 series, E2 ATEX is made for extreme environments: extremely water-resistant (IP66 and IP69K), impact-resistant (IK07), as well as temperature- and chemical-resistant.

TECHNICAL DATA

General data

Housinglacquered aluminium
Light sourceLED, 4000 K, CRI (Ra) 80
Opticslinear lens, polycarbonate (PC), medium wide-angle
UGR classification <= 28
Luminous flux 6650 lm
Luminous efficacy 130 lm/W
LLMF @50khrs (Tq=25°C) 96%
Ambient temperature-20°C – 40°C

Mechanical Properties

Type individual luminaire
Mounting surface mounted
Dimensions (L x W x H) 1120 mm x 80 mm x 135 mm
Colour RAL7035 – light grey
IP IP66
ATEX II 2D Ex tb IIIC T80°C Db, II 3G Ex ec IIC T4 Gc
Approximate weight 6.46 kg

Electrical Properties

Driver not dimmable
Power 51 W
Voltage 220-240V
Frequency 50-60Hz AC
Power factor1
Nr of luminaires per circuit breaker B16(12)/C16(21)

Spectral properties

Photobiological safety IEC/TR 62778: RG1

Installation Properties

Power supply connection push-in terminals
Cable entry cable gland M20
Type of wiring through wiring included
Nr. of poles 3 pole
Conductor cross section 2.5

Classifications

CIE607 / 867 / 954 / 983 / 1002
0.62 / 0.88 / 0.97 / 0.98 / 1.000.62 / 0.88 / 0.97 / 0.98 / 1.00
BZBZ2/1/BZ3/1.25/BZ2/1.5/BZ3
CAE CAE 3/5°/CAE 2/55°/CAE 3
DINA50 (Nach Arbeitsblatt 7 und 8)
DIN_UPhi u = 0.98
DIN_SUPhi su = 0.64
UTE0.98 C + 0.02 T
Luminous area0.066 m²

Polar diagram